Roughin-Endmill-SC-E2-+-AL-EZI

E2H E2 — 3 flutes, sharp corner, Ø 6 mm

Swiss Made

Profile view

Top view

E2 High Precision Tool Material

Cutting Angles ?40° ?18°

45° Precision Angle Measurement

Dual Direction Helical Drill Bit

2.2xD Depth for Tools

Three-Point Contact Tool

Standard Tool Wear Indicator

Specifications

Dimensions

Material & geometry

●●● Excellent (3/3)

●●○ Good (2/3)

●○○ Possible (1/3)

○○○ Not recommended

Material	Specification	Grp	22602H-6
Alloyed and non-alloyed steelsNon-alloyed steels	Rm < 450 N/mm²	1a	○○○
	Rm 450–700 N/mm²	1b	○○○
	Rm 700–900 N/mm²	1c	○○○
	Rm > 1200 N/mm²	1d	○○○
Stainless steelsStainless steels	Rm < 650 N/mm²	2a	○○○
	Rm 650–950 N/mm²	2b	○○○
	Rm > 950 N/mm²	2c	○○○
Hardened steelsHardened steels	44–56 HRC	3a	○○○
	57–67 HRC	3b	○○○
Exotic materialsSpecial alloys	< 32 HRC	4a	○○○
	> 32 HRC	4b	○○○
GraphiteIndustrial graphite		5	○○○
Cast ironGrey / nodular cast iron	< 32 HRC	6a	○○○
	> 32 HRC	6b	○○○
TitaniumTitanium alloys	Rm < 600 N/mm²	7a	○○○
	600 < Rm N/mm²	7b	○○○
Nickel alloysInconel, Hastelloy	Rm < 1000 N/mm²	8a	○○○
	Rm > 1000 N/mm²	8b	○○○
Copper, brass, bronzeCopper-based	Rm < 850 N/mm²	9a	●●●	Calculate
	Rm > 850 N/mm²	9b	●●●	Calculate
AluminumAluminum alloys	Si < 0.5%	10a	●●●	Calculate
	0.5% < Si < 5%	10b	●●●	Calculate
	Si > 5%	10c	●●○	Calculate
Synthetic materialsEngineering plastics	Thermoplastic	11a	○○○
	Thermoset	11b	○○○
Composite materialsReinforced composites	Glass fiber / GFK	12a	○○○
	Carbon fiber / KFK	12b	○○○
Precious metalsGold, platinum, silver	Gold	13a	○○○
	Platinum	13b	○○○